Fiber optic mode conditioning patch cable

Gets fiber optic mode conditioning patch cable from Star Link! Because mode conditioners resemble typical duplex patch cables, they can be simply integrated into a system without the use of additional components or hardware. Its length can range from one meter to several meters to meet practically any network topography. The usage of this patch cord is required due to the single-mode launch nature of the -LX (1300nm) transceiver modules used for Gigabit Ethernet. Both single-mode and multimode fibers must be supported by these modules. When a single-mode laser is fired into the core of a multimode fiber, numerous signals are created, confusing the receiver at the other end. When a single-mode signal is launched into a multimode fiber, the DMD (differential mode delay) phenomenon can result in several signals being generated within the multimode fiber. This effect has the potential to perplex the receiver and cause errors. To eliminate DMD and the multiple signals that follow, mode conditioning connections use an offset between single-mode and multimode fibers. Patch cables are essential for fiber optic connectivity. For more info:-http://www.starlinkit.com/prod....uct/ethernet-patch-c